iBerry Hello Activator - iPhone XS Max - iOS17-27 (Win-Mac) (Pico 2 RP2350)✅
iBerry v1.2 — Hello Service
🔧 Service Procedure
1. 📱 Connect the device and enter Recovery Mode. Register the ECID in the tool.
2. ⚙️ Select DFU Mode and follow the instructions shown by the tool. Disconnect the USB cable once DFU is active.
3. 🔌 Connect your Raspberry Pi Pico 2 or Waveshare Board to prepare the PWNED DFU environment.
4. 📲 Reconnect the device to the iBerry tool and wait for it to be recognized.
5. 🚀 Select Boot Mode and let the tool proceed with the service.
⚠️ Notes
- Use a reliable USB cable.
- Follow the procedure in the correct order.
- Confirm that your device and iOS version are supported.
🌐 iBerry v1.2 — Hello Service
⚡ Updated • Stable • Reliable
https://mega.nz/folder/j6ZSSJyB#nQnIMWLhUi_cT9NFfNIXeQ
🔧 Service Procedure
1. 📱 Connect the device and enter Recovery Mode. Register the ECID in the tool.
2. ⚙️ Select DFU Mode and follow the instructions shown by the tool. Disconnect the USB cable once DFU is active.
3. 🔌 Connect your Raspberry Pi Pico 2 or Waveshare Board to prepare the PWNED DFU environment.
4. 📲 Reconnect the device to the iBerry tool and wait for it to be recognized.
5. 🚀 Select Boot Mode and let the tool proceed with the service.
⚠️ Notes
- Use a reliable USB cable.
- Follow the procedure in the correct order.
- Confirm that your device and iOS version are supported.
🌐 iBerry v1.2 — Hello Service
⚡ Updated • Stable • Reliable
https://mega.nz/folder/j6ZSSJyB#nQnIMWLhUi_cT9NFfNIXeQ