Post

EFT Pro Dongle — Update V5.5.3 [Apple] A12 / A13 Boot Diagnostics & Factory Erase Support Release Date: 10-07-2026 🍏 Apple — Purple Mode Added new operations for supported Apple A12 / A13 devices, powered by the usbliter8 RP2350 Hardware Pwner: • 🆕 Boot Diag – Boot the device into Apple Factory Diagnostics Mode. BETA • 🆕 Erase – Read Serial Number, Wi-Fi MAC, Bluetooth MAC, and Ethernet MAC, then trigger a Factory-Level Wipe on the next boot. BETA 📱 Supported Models • iPhone XS • iPhone XS Max • iPhone XR • iPhone 11 • iPhone 11 Pro • iPhone 11 Pro Max • iPhone SE (2nd generation) • iPad Air (3rd generation) • iPad mini (5th generation) • iPad (8th generation) • iPad (9th generation) ⚠️ Requirements • Boot Diag and Erase require a compatible RP2350-based Hardware Pwner running usbliter8 firmware. • You can use the new Prepare usbliter8 Board operation to automatically detect and flash supported RP2350 boards with the required firmware. • Before running Boot Diag or Erase, the target iPhone or iPad must first be successfully placed into Pwned DFU Mode using the usbliter8 Hardware Pwner. 🔌 Supported RP2350 Boards • Waveshare RP2350 USB-A • Waveshare RP2350 Zero • Pimoroni TINY2350 • Raspberry Pi Pico 2 Note: Any compatible RP2350-based board flashed with usbliter8 firmware may also be used. 💡 Usage Flow 1. Connect the RP2350 Hardware Pwner to the PC. 2. Put the iPhone / iPad into DFU Mode, then connect it to the RP2350 USB-A port. 3. Disconnect and reconnect the RP2350 board to the PC to start the pwn process. 4. Wait until the device is successfully placed into Pwned DFU Mode. 5. Select Boot Diag → the device boots into Apple Factory Diagnostics Mode. 6. Select Erase → a Factory-Level Wipe is triggered on the next boot. https://forum.gsmhosting.com/vbb/f475/eft-pro-dongle-update-v5-5-3-apple-a12-a13-boot-diagnostics-factory-erase-3446540