FRP Reset Tecno SPARK GO 1 ( KL4 ) — Infinity Box

Start Connect Tecno KL4 Boot [FDL] Factory v2.49
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device... SPRD U2S Diag (COM3) 1782:4D00
boot: SPRD3
C:\InfinityBox\CM2SP3\boot\Tecno\spark-Go-1\fdl1.43009cf3.ldr
C:\InfinityBox\CM2SP3\boot\Tecno\spark-Go-1\fdl2.43009cf3.048fe3d0.2025-09.ldr
Boot[1] [+] Custom... Ok
Exec[43009cf3|048fe3d0]...
Bootcode Handshake... Ok
boot: Spreadtrum Boot Block version 1.1
Loader ACK... Ok
Set port speed... 2000000
Enable charge... Ok
Boot[2] [+] [+]... Ok
Exec[2]... Ok
Version: 0x10; Memory: 0x102; Random: 0x00
Enable RAW... Ok
Disable transcode... Ok
Loader exec[0] Ok
Selected CPU [SC9230]
Detected CPU [SC9230]
Dev UID: 1a0bbd4d927169d79567467479956c6f7843701d3c11fd7f87d4af3bf0007305 007446040c3e471a
hwid cache absent
get flash type... EMMC
For advanced features use Boot [FF] FireFly
Load partition table... 1st GPT Ok; 75 entries
Connected
 
Partitions: 77
Slot info... slot: b
get sw info...
Probe boot... vendor_boot_b v4 lz4 ramdisk.size=62.48 Mb; found 2 props boot_b v4 ramsidk.size=0; Ok 5 sec
super OTA updated
Probe vbmeta... End 16 us
  Product Brand: TECNO
  Product Board: tssi_arm64_tecno
  Product Device: tssi_arm64_tecno
  Product Model: tssi
  Product Name: tssi
  Patch Level: UP1A.231005.007
  SW Version: 260414V1
  Ver. CodeName: REL
  Sec. Patch: 2026-05-01
  Build Time: 4/14/2026 7:59:13 AM
  Product Info: tssi_arm64_tecno
  Product Board: TECNO-KL4
  Product Device: TECNO-KL4
  Product Manfct: TECNO
  Product Model: TECNO KL4
  Product Name: KL4-OP
  Board Platform: ums9230
  Display ID: KL4-F201ABCDEFGHIJKLUVWZ-UGo-OP-260414V4445
  SW Version: 260414V4445
  Build Time: 4/14/2026 8:00:02 AM
ID: tssi-tecno-kl4-tssi-arm64-tecno-kl4-op
Strategy [infinix/itel/tecno/viallon]
Firmware ID: UMS9230_TECNO_tssi_OSv14_KL4-F201ABCDEFGHIJKLUVWZ-UGo-OP-260414V4445_UP1A.231005.007_tssi_arm64_tecno_wota
OTA updated
Android ver: 14
userdata: [f2fs] FBE [file based encryption] cache: [f2fs]
Anti-crack feature: On
Backup(19) to C:\InfinityBox\CM2SP3\backup\SC9230_1a0bbd4d927169d7_tssi-tecno-kl4-tssi-arm64-tecno-kl4-op\
Read...
#1/77 [prodnv] 64.00 Mb Ok [64.00 Mb] 5 sec
#2/77 [miscdata] 1024.00 Kb Ok [1024.00 Kb] 78 us
#4/77 [trustos_a] 6.00 Mb Ok [6.00 Mb] 547 us
#5/77 [trustos_b] 6.00 Mb Ok [6.00 Mb] 531 us
#6/77 [sml_a] 1024.00 Kb Ok [1024.00 Kb] 94 us
#7/77 [sml_b] 1024.00 Kb Ok [1024.00 Kb] 94 us
#8/77 [uboot_a] 3.00 Mb Ok [3.00 Mb] 250 us
#9/77 [uboot_b] 3.00 Mb Ok [3.00 Mb] 235 us
#13/77 [l_fixnv1_a] 2.00 Mb Ok [2.00 Mb] 156 us
#14/77 [l_fixnv2_a] 2.00 Mb Ok [2.00 Mb] 172 us
#15/77 [l_fixnv1_b] 2.00 Mb Ok [2.00 Mb] 172 us
#16/77 [l_fixnv2_b] 2.00 Mb Ok [2.00 Mb] 157 us
#32/77 [teecfg_a] 1024.00 Kb Ok [1024.00 Kb] 78 us
#33/77 [teecfg_b] 1024.00 Kb Ok [1024.00 Kb] 94 us
#69/77 [calinv] 2.00 Mb Ok [2.00 Mb] 172 us File has only zeroes
#71/77 [tkv_a] 1024.00 Kb Ok [1024.00 Kb] 94 us => 64.00 Kb
#72/77 [tkv_b] 1024.00 Kb Ok [1024.00 Kb] 94 us => 64.00 Kb
#76/77 [splloader] 512.00 Kb Ok [512.00 Kb] 46 us => 64.00 Kb => 63.32 Kb
#77/77 [splloader_bak] 512.00 Kb Ok [512.00 Kb] 47 us => 64.00 Kb => 63.32 Kb
Saved 19 of 19 [95.26 Mb] to C:\InfinityBox\CM2SP3\backup\SC9230_1a0bbd4d927169d7_tssi-tecno-kl4-tssi-arm64-tecno-kl4-op\
Done 19 files
Pack... C:\InfinityBox\CM2SP3\backup\SC9230_1a0bbd4d927169d7_tssi-tecno-kl4-tssi-arm64-tecno-kl4-op\ Ok 2 sec
Verify C:\InfinityBox\CM2SP3\backup\SC9230_1a0bbd4d927169d7_tssi-tecno-kl4-tssi-arm64-tecno-kl4-op.7z Verified [2b02fbe5]
Probe bootloader... no hwid
Stop [Job 52476102] Connect v2.49 1 min 4 sec
 
Start FRP Complete. Erase Userdata Tecno KL4 Boot [FDL] Factory v2.49
Partitions: 77
Backup exist C:\InfinityBox\CM2SP3\backup\SC9230_1a0bbd4d927169d7_tssi-tecno-kl4-tssi-arm64-tecno-kl4-op.7z
Reset FRP... frp config found
wipe persist... Ok 32 us
Completed(1)
Reset Userdata... User Wipe Auto => User Format
#1 userdata... Wiped Ok
#2 cache... Wiped Ok
#3 metadata... Wiped Ok Done(3)
Stop [Job 52476102] FRP Complete. Erase Userdata v2.49 1 sec
In case of recovery loop make Reset Userdata with [User Make filesystem]
Reboot... Disconnect cable if it freez
Bye