ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM13)
CPU: SC9863A
BOOT: SPRD3
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
[00:00:10] Sending first loader.
[00:00:15] Sending second loader.
[00:00:24] Second loader sent ok.
New flash protocol detected.
Phone repply:
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
Device request autorization.
Phone have super partition.
[00:00:24] Making flash ic repartition.
[00:00:24] Format: l_runtimenv1
[00:00:24] [l_runtimenv1]Format OK.
[00:00:24] Format: l_runtimenv2
[00:00:24] [l_runtimenv2]Format OK.
[00:00:24] Format: misc
[00:00:24] [misc]Format OK.
[00:00:24] Format: uboot
[00:00:24] [uboot]Format OK.
[00:00:24] Format: uboot_log
[00:00:24] [uboot_log]Format OK.
[00:00:24] Format: metadata
[00:00:24] [metadata]Format OK.
[00:00:24] Format: cache
[00:00:24] [cache]Format OK.
[00:00:24] Format: sysdumpdb
[00:00:24] [sysdumpdb]Format OK.
[]disabled, skip.
[l_fixnv2][NVRAM]disabled, skip.
[00:00:24] Start write: l_deltanv
[00:00:25] Start write: trustos
[00:00:25] Start write: sml
[00:00:25] Start write: pm_sys
[00:00:25] Start write: teecfg
[00:00:25] Start write: uboot
[00:00:25] Start write: vbmeta
[00:00:25] Start write: gpsgl
[00:00:25] Start write: gpsbd
[00:00:26] Start write: wcnmodem
[00:00:26] Start write: l_gdsp
[00:00:26] Start write: l_ldsp
[00:00:27] Start write: l_modem
[00:00:29] Start write: boot
[00:00:33] Start write: recovery
[00:00:36] Start write: dtbo
[00:00:37] Start write: socko
[00:00:38] Start write: vbmeta_system
[00:00:38] Start write: super
[00:04:00] Start write: prism
[00:04:03] Start write: optics
[00:04:03] Start write: cache
[00:04:03] Start write: omr
[00:04:03] Start write: userdata
[0][0][0] Error send frame.
[YAFFS_IMG2]Error Write: userdata ,aborting.
[00:04:39] Format: misc
[00:06:26] [misc]Format OK.
[00:06:26] Format: metadata
[00:08:15] [metadata]Format OK.
[00:08:15] Format: userdata
[00:10:04] [userdata]Format OK.
[00:10:04] Format: cache
[00:11:36] [cache]Format OK.
Error while writing firmware, aborting.
Exe version: NCK Unisoc Online Tool 0.8